

IOBZ40 – IVANKO OBZ-40 OLYMPIC CURL BAR-$490.00
AN EXTRA-LONG, COMMERCIAL QUALITY EZ-CURL BAR.
Recommended for commercial use.
80,000 P.S.I. rated.
Length: 6 FT. 2 in.
53-1/2″ between sleeve collars.
Sleeve plate loading length: 9-1/2″.
Weight: 35 lbs.
Black oxide.
Recommended collars: COT-2.5.


IOBZ55 – IVANKO OBZ-55 OLYMPIC CURL BAR-$380.00

An extra-high strength precision E-Z curl bar.
“This bar has deep bends, which allow the user to relieve stress on his wrists. You will notice the difference between this bar and all others, at once.” – Tom Ivanko.
218,000 P.S.I. rated.
mag tested.
ultra-sonic tested.
x-ray tested.
Extremely accurate weight (within 1/2 oz.)
Ground and polished.
Beautiful black oxide finish.
Length: 4′ 6 1/2″ ; weight: 30.30 lbs.


IOB20KG – IVANKO OB-20 KG. OLYMPIC HIGH STRESS BAR BLACK-$540.00 EA.

An extra-high strength precision Olympic bar.
200,000+ P.S.I. rated.
mag tested.
ultra-sonic tested.
x-ray tested.
Special straightness specified (Less than .006/ft. T.I.R.)
Extremely accurate weight (within 1/2 oz.)
Ground and polished.
Beautiful black oxide finish.
Meets I.W.F. specifications.


IOBX20KG – IVANKO OBX-20KG OLYMPIC BAR BLACK-$545.00 EA.


An extra-high strength precision Olympic bar with center knurl.
200,000+ P.S.I. rated.
mag tested.
ultra-sonic tested.
x-ray tested.
Special straightness specified (Less than .006/ft. T.I.R.)
Extremely accurate weight (within 1/2 oz.)
Ground and polished.
Beautiful black oxide finish.
Built to the same spec as the OB-20KG, except with center knurl.


IOBZS30 – IVANKO OBZS-30 STAINLESS OLYMPIC CURL BAR -$0.00 EA. NOT AVAILABLE AT THIS TIME

100% Made in the USA. Stainless Steel Bar & Sleeves.
No Welds. No Bolts. No End Play (“slop”).
Perfectly Balanced.
You’ll immediately feel the IVANKO difference when you hold this bar in your hands compared to other bars on the market. Our EZ-Curl Bar is in perfect alignment. The sleeves are parallel to each other. The bend is 40 degrees, a full 10 degrees more than most other bars.
218,000 PSI rated Stainless Steel.
Mag Tested.
Ultra-Sonic Tested.
Straightness Certified.
Diameter: 1-1/8″.
Length: 57″.
Weight: 30.30 lbs.
Made in U.S.A.

IOBS66 – IVANKO OBZS-30 STAINLESS OLYMPIC CURL BAR -$815.00 EA.

OBS-66: 5-1/2 ft. Stainless Steel Olympic Bar.
218,000 P.S.I. rated Stainless Steel.
Mag Tested.
Ultra-Sonic Tested.
Straightness Certified.
Length: 5 foot, 6 inches.
Diameter: bar: 28mm (1.103″); Sleeves: 1.968″ (50mm).
Distance between sleeves: 43″ (1092mm).
Weight 32.5 lbs.
Made in U.S.A.


IOBS20KG – IVANKO OBS-20KG STAINLESS STEEL OLYMPIC BAR-$1,075.00 EA.

OBS-20KG: Our Iconic Olympic Bar in Stainless Steel.
When your goal is just to sell a product, your Olympic bar design is finished when it’s “good enough.” When your goal is perfection, you’re never satisfied, never finished.
For example, a tensile strength of 150,000 PSI is “strong enough” for most manufacturers. We heat treat our stainless steel bar to 218,000 PSI, because our tests tell us anything weaker will bend.
Most think bar stock is “straight enough” if it meets the mil standard of 89/1000 inch over the 7ft length of the bar. We further straighten our bar to a tolerance of 10/1000 inch, because anything less straight will cause rotational torque during heavy lifting.
Most think there is a coating or plating that is “durable enough.” We chose stainless steel because it needs no coating, so there’s nothing to peel off, chip, or rust.
Most think a bar is “safe enough” just because it’s made of steel. We ultrasonic test and magnetic particle test every bar to detect internal and external cracks and flaws because they can spread over time and cause the bar to snap.
218,000 P.S.I. rated Stainless Steel.
Mag Tested.
Ultra-Sonic Tested.
Straightness Certified.
Length: 7 feet, 2 inches.
Diameter: 28mm (1.103″).
Weight 20kg (44.08 lb).
Made in U.S.A.
Meets I.W.F. specifications.


IOBXS20 – IVANKO OBXS-20KG29MM STAINLESS STEEL OLYMPIC POWER LIFTING BAR 29mm-$0.00 EA. NOT AVAILABLE AT THIS TIME


The IVANKO 29mm Stainless Steel Powerlifting Bar.
218,000 P.S.I. rated Stainless Steel.
Mag Tested.
Ultra-Sonic Tested.
Straightness Certified.
Length: 7 feet, 2 inches.
Diameter: 29mm.
Weight: 20KG (44.08 lb).
Center Knurling.
Made in U.S.A.


IOBSNB20 – IVANKO OBSNB-20KG STAINLESS STEEL OLYMPIC COMPETITION WEIGHTLIFTING BAR W/ GERMAN NEEDLE BEARINGS-$1,200.00 EA.

A Stainless Steel Olympic Bar with Needle Bearings.
218,000 P.S.I. rated Stainless Steel.
Mag Tested.
Ultra-Sonic Tested.
Straightness Certified.
Length: 7 feet, 2 inches.
Diameter: 28mm (1.103″).
Weight 20kg (44.08 lb).
Made in U.S.A. Bearings Made in Germany.


GAOB-GENERIC ALUMINUM OLYMPIC BAR-$195.00
Bare Aluminum Finish
Capped End with Roll Pin
Bar Weighs 15 lbs.
72″ overall length.
49″ Grip area.
Great for training in technique or if you cannot lift the over 45 lbs. of the Steel Olympic Bars.
Olympic Knurling w/ 28 mm Handle Diameter
2” / 50mm Sleeves – Olympic Standard
Ultra-light Olympic training bars are made to be used in perfecting technique for beginner and experienced athletes alike. The Knurled areas mimic that of a full size Olympic bar to make transitioning to a full size bar much easier.
Not recommended for drops

GOCB-GENERIC OLYMPIC ECONOMY CURL BAR CHROME (18 1/2 lbs.) -$88.00 EA.
47 Inches / 20 LB (total weight w/ collars)
Chrome handle and sleeves
Knurling w/ 28 mm Handle Diameter
Bolted End – Comes with Bolt on Collars
2” / 50mm Sleeves – Olympic Standard

GOCBDB-GENERIC DELUXE OLYMPIC CURL BAR – BLACK -$120.00 EA.
47 Inches / 20 LB (total weight w/ collars)
Black Oxide handle and sleeves
Brass Bushings
Knurling w/ 28 mm Handle Diameter
Bolted End – Comes with Bolt on Collars
2” / 50mm Sleeves – Olympic Standard

GOCBDC-GENERIC DELUXE OLYMPIC CURL BAR – CHROME -$120.00 EA.
47 Inches / 20 LB (total weight w/ collars)
Chrome handle and sleeves
Brass Bushings
Knurling w/ 28 mm Handle Diameter
Bolted End – Comes with Bolt on Collars
2” / 50mm Sleeves – Olympic Standard

GOTB-GENERIC OLYMPIC TRICEPS BAR-$85.00 EA.
33” Inches / 20 LB
Chromed handles and sleeves
Knurling w/ 28 mm Handle Diameter
Bolted End – Comes with Bolt on Collars
2” / 50mm Sleeves – Olympic Standard

GOB60-GENERIC OB-60 OLYMPIC 5’ BAR BLACK-$125.00 EA.
5 Ft(60 Inches) / 30 LB
Black Oxide Handle / Chrome Sleeves
Brass Bushings
500 lb Weight Capacity
Olympic Knurling w/ 28 mm Handle Diameter
Bolted End
2” / 50mm Sleeves – Olympic Standard

GOB72-GENERIC OB-72 OLYMPIC 6’ BAR BLACK-$165.00 EA.
6 Ft(72 Inches) / 35 LB
Black Oxide Handle / Chrome Sleeves
Brass Bushings
Olympic Knurling w/ 28 mm Handle Diameter
Bolted End
2” / 50mm Sleeves – Olympic Standard

GOB86-GENERIC OB-86 7’ OLYMPIC BAR CHROME-$140.00 EA.
Power Lifting Bar (18kg ~ 40 lbs)
All Chrome
Brass Bushings
750 lb Weight Capacity
Olympic Knurling w/ 28 mm Handle Diameter
Capped End with Roll Pin
2” / 50mm Sleeves – Olympic Standard

GOBE86-GENERIC ECONO 7’ OLYMPIC BAR BLACK (this bar is all black)-$108.00 EA.
(20kg ~ 45 lbs)
Black Oxide Finish
600 lb weight Capacity
Power Lift Knurling w/ 31 mm Handle Diameter
Bolted End
2” / 50mm Sleeves – Olympic Standard



GOPB10-GENERIC OLYMPIC POWER BAR 1000 LB. TEST 2-TONE-$245.00 EA.
GOPB15-GENERIC OLYMPIC POWER BAR 1500 LB. TEST 2-TONE-$290.00 EA.
7ft / 20 KG Olympic Hybrid Power Lifting Bar
2 Toned – Black Oxide Handle, Chromed Sleeves
1,000 lb or 1,500 lb weight Capacity Tested
Olympic Knurling w/ 28 mm Handle Diameter
2” / 50mm Sleeves – Olympic Standard

GCOB-GENERIC CAMBERED OLYMPIC BAR-$175.00 EA.
Cambered bar 20 KG – 45 LBs
Chromed handles and sleeves
Brass Bushings
Knurling w/ 28 mm Handle Diameter
Bolted End – Comes with Bolt on Collars
2” / 50mm Sleeves – Olympic Standard
The specialty camber bar is used for emphasis on your hamstring and lower back areas. The construction allows the user to stay vertical throughout the squat to deepen your squat further. Train for extra explosiveness while keeping the safest and correct form.

GOSB-GENERIC OLYMPIC SHRUG BAR ZINC FINISH-$190.00 EA.
Closed Square Design
Chrome raised handles and sleeves
Knurling w/ 28 mm Handle Diameter
Bolted End
2” / 50mm Sleeves – Olympic Standard
All Chrome Finish

GB60-GENERIC 1″ X 60″ REGULAR SOLID CHROME BAR-$40.50 EA.

GB72-GENERIC 1″ X 72″ REGULAR SOLID CHROME BAR-$45.00 EA.

GB84-GENERIC 1″ X 84″ REGULAR SOLID CHROME BAR-$58.50 EA.

GRCB-GENERIC REGULAR CURL BAR-$36.00 EA.

GTB-GENERIC REGULAR SOLID TRICEPS BAR-$39.00 EA.

GTB60-GENERIC REG. THREADED BARBELL BAR 60” W/ COLLARS-$63.00 EA.

GTB72-GENERIC REG. THREADED BARBELL BAR 72” W/ COLLARS-$67.50 EA.

GTB84-GENERIC REG. THREADED BARBELL BAR 84” W/ COLLARS-$72.00 EA.

GTCB-GENERIC REGULAR THREADED CURL BAR W/ COLLARS-$49.00 EA.

GTTB-GENERIC REGULAR THREADED TRICEPS CURL BAR W/ COLLARS-$45.00 EA.